HDD • Trenchless Utility Installation • Gas • Electric • Fiber • Water • Sewer • Irrigation

Directional Drilling & Utility Boring for Edmond, Oklahoma & North OKC Suburbs

Trinity Boring Solutions provides complete horizontal directional drilling (HDD) in Edmond, OK for gas companies, electric utilities, fiber contractors, municipalities, school districts, HOAs, and developers. From short service crossings in established neighborhoods to multi-duct highway bores along Broadway Extension, I-35, Danforth, Covell, and 15th Street, we install gas, electric, fiber, water, sewer, and irrigation utilities without tearing up streets and landscaping.

Edmond combines hilly terrain, red clay, rock seams, golf communities, and busy arterials. Our HDD crews know the local soils, right-of-way standards, and neighborhood access constraints, so we can complete bores on line, on grade, and on schedule with clean restoration and minimal disruption for homeowners and businesses.

HDD bores for gas, electric, fiber, water, sewer & irrigation in Edmond
Crossings under streets, drives, creeks & golf cart paths
Hydro-vac potholing & conflict checks for crowded utility corridors

Since 1965 • Serving Edmond, North Oklahoma City, Deer Creek, Arcadia, Jones, Luther & surrounding Oklahoma County communities

📏

Typical Bore Lengths

40' – 700'+ depending on diameter & soil profile

🛠️

Utilities Installed

Gas • Electric • Fiber • Water • Sewer • Irrigation • Low-Voltage & Private Utilities

🌎

Edmond Ground Conditions

Red clay • Fill • Rock seams • Creek bottoms • Sand lenses

Safety & Compliance

Call OKIE 811 OSHA compliant HDD contractor DOT & right-of-way aware boring contractor

Why Use Directional Drilling for Utilities in Edmond, OK?

Edmond is packed with master-planned neighborhoods, gated communities, schools, churches, golf courses, and commercial corridors. Saw-cutting and trenching across these finished surfaces is expensive and disruptive. Horizontal directional drilling (HDD) allows us to install gas, power, fiber, water, sewer, and irrigation with short, contained pits instead of long trenches — keeping traffic flowing and properties looking sharp.

HOAs & Golf Communities

Protect Entrances & Amenities

Entry monuments, stamped concrete, decorative pavers, and lush landscaping are common in Edmond subdivisions. HDD lets us route utilities under these features while leaving entrances and amenities looking the way residents expect.

Schools & Campuses

Work Around Schedules, Not Against Them

We routinely support Edmond Public Schools, private schools, churches, and athletic facilities with utility bores that avoid conflicts with buses, pickup lines, and practice schedules while keeping parking lots and sidewalks intact.

High-Traffic Corridors

Less Traffic Control, Faster Restoration

Crossings along Broadway, 2nd & 15th Street, Santa Fe, Kelly, and other key routes are ideal for HDD. Short-duration lane shifts and contained pits beat full closures and large pavement patches every time.

HDD in Action Across Edmond & North OKC

From historic downtown Edmond streets to newer developments along I-35 and Covell, Trinity Boring Solutions keeps projects moving with clean, organized HDD crews. We respect every property we work on — from retail centers and office parks to quiet cul-de-sacs.

Directional drilling under a busy arterial street in Edmond
Long HDD bore beneath a multi-lane Edmond arterial carrying power, fiber, and gas without extended lane closures or full-width pavement replacement.
Utility boring work through a master-planned neighborhood in Edmond
Neighborhood gas, water, and telecom bores completed with small, neat restoration patches.
Commercial site development bore in Edmond
Multi-conduit HDD installations feeding new retail and office developments along the I-35 corridor.

Schools, Golf Courses & Creek Crossings in Edmond

Edmond utility work often means weaving around school zones, golf greens, creeks, and busy neighborhood entrances. HDD gives owners and engineers a tool to get utilities where they need to go while keeping properties safe, clean, and open for daily use.

Directional boring work near a school campus in Edmond
Utility bores across school drives and bus lanes scheduled around drop-off and pickup windows.
HDD irrigation work on an Edmond golf course
Irrigation and low-voltage bores across fairways and cart paths with minimal turf disturbance.
Directional drilling crossing a creek corridor in Edmond
Creek and greenbelt crossings completed with HDD to protect banks, trails, and drainage capacity.

Edmond Directional Drilling & Utility Boring Services

Trinity Boring Solutions delivers a full bundle of HDD and hydro-vac services in Edmond. We combine gas & energy HDD, electric & fiber bores, water & sewer line bores, irrigation & private utility boring, and hydro-vac daylighting into one coordinated package so you only need to make a single call.

Gas HDD utility boring in Edmond
Gas & Energy HDD

Gas Services, Mains & Steel Sleeves

Street, driveway, and cart path crossings, regulator station bores, and sleeve installations for gas utilities throughout Edmond neighborhoods and commercial areas.

Electric and fiber conduit installed by HDD in Edmond
Electric & Fiber HDD

Power, Fiber & Street Lighting Conduit

Multi-duct fiber banks, telecom ducts, street lighting circuits, and power feeds installed beneath streets, sidewalks, and drives for Edmond subdivisions and commercial corridors.

Directional boring for water and sewer utilities in Edmond
Water & Sewer Bores

Water Lines, Sewer Laterals & Force Mains

HDD installation of water services, mains, sewer laterals, and force mains across roads, drainageways, and greenbelts with grades and cover set to plan.

Irrigation and private utility boring in Edmond
Irrigation & Utility Boring

Irrigation, Drainage & Private Conduit

Ideal for golf courses, HOAs, schools, churches, sports complexes, and private campuses needing irrigation mains, sleeves, drainage lines, and low-voltage conduits.

Hydro-vac daylighting utilities in Edmond
Hydro-Vac & Daylighting

Non-Destructive Utility Exposure

Hydro-vac test holes and slot trenches to verify existing gas, power, fiber, water, and sewer lines in Edmond before HDD operations — reducing risk and keeping bores on target.

Already have plan sheets or a quick sketch for an Edmond project? Upload them with your Edmond directional drilling request →

A Straightforward HDD Process for Edmond Utility Work

We keep owners, engineers, and contractors on the same page — from first look to final patch. Everyone understands where we’re boring, what we’re installing, and how the site will be restored before we pull off.

  1. 1. Scope & Pricing

    Send plan sheets, a bid package, or a simple markup. We confirm utility type, bore length, cover requirements, surface conditions, access, and restoration expectations, then provide a clear, itemized price for directional drilling in Edmond.

  2. 2. 811 Tickets & Daylighting

    We verify OKIE 811 tickets, coordinate private locates in gated communities and campuses, and schedule hydro-vac potholes at conflict points so our drill heads stay safely clear of existing utilities.

  3. 3. Controlled HDD Boring

    Our operators complete the pilot bore, ream passes, and product pull using mud programs tuned for Edmond red clay, fill, and rock seams, maintaining grade, separation, and pullback limits.

  4. 4. Documentation & Turnover

    We can provide depth checks, separation notes, photos, and basic as-built information so you can close out HDD work cleanly and update your records.

  5. 5. Backfill & Restoration

    Pits are backfilled, compacted, and restored per spec. Pavement patches, turf repair, and landscape touch-ups are left neat so your Edmond property looks put-together when the job is done.

Directional drilling workflow sequence on an Edmond project
HDD, hydro-vac, and restoration scheduled together so your Edmond project runs smoothly from start to finish.
Need HDD and hydro-vac on the same Edmond project?

We can package potholing and directional drilling into a single scope so utilities are daylighted, documented, and ready for bore crews without waiting on another contractor.

Learn more about Hydro-Vac & Daylighting →

Who Uses Trinity Directional Drilling in Edmond?

We support a wide mix of utility owners, contractors, and property managers across Edmond and North Oklahoma City. If your project involves underground utilities, HDD can usually make it cleaner, safer, and more cost-effective.

Gas & Energy Utilities

Gas distribution companies and contractors needing safe, efficient street and driveway crossings, regulator station bores, and system upgrades through Edmond and Deer Creek.

Electric & Telecom Providers

Power and fiber backbones, telecom laterals, and street lighting conduit installations for neighborhoods, campuses, and business districts across Edmond.

City & Water / Sewer Districts

Municipal water, sewer, and storm improvements that must cross busy streets, creeks, trails, and greenbelts where open trenching is not practical.

Developers & General Contractors

Site utility packages for new neighborhoods, retail centers, mixed-use projects, and medical or office developments throughout the Edmond market.

Schools, Churches & Campuses

Public and private schools, churches, and campus-style facilities that need utility upgrades without shutting down lots, drives, or entrances.

HOAs, Parks & Clubs

HOAs, parks, and private clubs that rely on neat irrigation, drainage, and low-voltage bores to keep grounds in top shape.

Building a full utility package in Edmond? Combine our Gas & Energy HDD , Electric & Fiber HDD , Water & Sewer Bores , Irrigation & Utility Boring and Hydro-Vac Daylighting under a single Trinity Boring Solutions scope.

Edmond, Oklahoma Directional Drilling — FAQ

What utilities can you install with HDD in Edmond?

We regularly install gas lines, electric conduit, telecom and fiber duct banks, water services and mains, sewer laterals and force mains, irrigation mains, drainage pipes, and low-voltage/private utilities using HDD throughout Edmond and North OKC.

How do you avoid hitting existing utilities?

We verify OKIE 811 tickets, coordinate private locates for HOAs and campuses, and use hydro-vac daylighting at conflict points to visually confirm gas, electric, fiber, water, and sewer locations before the bore starts. Depths and offsets are planned to maintain proper separation and clearance.

What do you need to quote an Edmond HDD project?

A site address or GPS pin, approximate bore length and pipe size, utility type, surface conditions (pavement, turf, creek, etc.), and any restoration requirements. Plan sheets or photos of the crossing area help us lock in tight pricing faster.

How far in advance should I schedule an Edmond HDD crew?

More notice is always better — especially for HOAs, schools, or projects along major Edmond routes that require traffic control. We also respond to short-notice and emergency repairs and will give you our fastest realistic start date.

Can you handle restoration after the directional bore?

Yes. Our standard scope includes pit backfill, compaction, pavement patching, and basic turf and landscape repair. For larger-scale landscape or hardscape work, we can coordinate with your preferred contractors or include expanded restoration by agreement.

Ready to Schedule Directional Drilling in Edmond, OK?

Send us your plans or a simple sketch and we’ll build a clean, code-aligned HDD and hydro-vac plan that keeps your Edmond utility project on schedule and out of trouble.

Call or text: 405-409-7423
Email: darren@wordpress-1653543-6578033.cloudwaysapps.com