Gas & Energy Directional Drilling in Oklahoma
Trinity Boring Solutions provides precision horizontal directional drilling (HDD) for gas mains, service lines, and energy conduit across Oklahoma. We install gas infrastructure safely, on-code, and with minimal disruption to roads, driveways, and landscaping.
- HDD for gas mains, services, and energy conduit
- Road, highway, and structure crossings without open trenching
- Contractor-friendly, fully licensed and insured in Oklahoma
Since 1965 • Serving Oklahoma City, Tulsa, Norman, Edmond and statewide.
Why Choose Trinity Boring Solutions for Gas & Energy HDD?
Gas infrastructure leaves no room for guesswork. You need a directional drilling crew that understands codes, clearances, safety, and schedule.
Decades of Gas HDD Expertise
We’ve been working in Oklahoma rights-of-way since the 1960s. From tight urban alleys to rural ROWs, our crews understand local soils, gas codes, and real-world constructability.
Safety & Compliance First
Every bore is planned around utility locates, separation distances, and cover requirements. We work with your gas utility, inspectors, and GC to keep the project safe and fully compliant.
Minimal Surface Disruption
HDD lets us install gas lines under roads, parking lots, and landscaping with minimal restoration. Less open trenching means fewer complaints, faster turnover, and lower costs.
Gas & Energy Directional Drilling Services
From a single residential service line to multi-shot gas main extensions, Trinity Boring Solutions supports contractors, utilities, and developers across Oklahoma.
Gas Service Line HDD
Trenchless installation and replacement of gas service lines to homes, shops, and small businesses — without tearing up driveways, sidewalks, or landscaping.
Gas Mains & Energy Conduit
HDD for gas mains, sleeves, and energy conduit in new developments, industrial sites, plant expansions, and utility corridors.
Road, Highway & Structure Crossings
Trenchless bores under busy streets, highways, rail, and drainage structures to keep traffic open and critical infrastructure undisturbed.
HDD Planning & Coordination
Entry/exit pit layout, bore path planning, and coordination with other trades so your gas scope stays aligned with the overall project schedule.
Our Gas HDD Process in Oklahoma
A straightforward, repeatable workflow that keeps everyone in the loop — from estimator to superintendent to inspector.
1. Plan Review & Scope Call
You send us plans or a site sketch. We review pipe size, shot length, depth, constraints, and timing, then clarify details in a short call.
2. Utility Locates & Bore Path Layout
We coordinate with OKIE 811 and your team, lay out entry/exit pits, and plan clearances from existing water, sewer, electric, and communications.
3. Pilot Bore
Our crew drills the pilot shot along the planned path, monitoring depth and alignment while avoiding marked and daylighted utilities.
4. Reaming & Hole Enlargement
We step up ream sizes as needed to create a clean annulus for your gas pipe or casing, matching soil conditions and product diameter.
5. Pullback & Clean-Up
Your pipe is pulled in, entry/exit pits are restored, and the site is cleaned so your gas contractor or utility can handle pressure testing and tie-ins.
Featured Gas HDD Project – Oklahoma City
Urban gas main extension under a busy arterial roadway.
- Scope: HDD installation of a gas main extension beneath a multi-lane city street.
- Challenges: Heavy traffic, congested utility corridor, tight work windows, strict restoration requirements.
- Approach: Coordinated traffic control and work windows, careful pilot bore around existing utilities, staged reaming and pullback.
- Result: Gas main installed on-grade with no open cutting across the roadway and minimal disruption to local businesses.
Gas & Energy HDD Capabilities
Gas & Energy HDD Service Areas in Oklahoma
We mobilize across Oklahoma for gas and energy bores — from infill service work to large-scale new construction.
Oklahoma City Metro
Oklahoma City, Edmond, Norman, Moore, Yukon, Mustang, Midwest City, Del City, and surrounding communities.
Tulsa & Eastern Oklahoma
Tulsa, Broken Arrow, Bixby, Jenks, Owasso, and nearby cities needing gas and energy HDD support.
Statewide & Rural
Rural gas mains, plant work, and corridor bores throughout Oklahoma. Send us your location and scope and we’ll confirm availability.
Building out more locations? Check out our future city & county landing pages for directional drilling across Oklahoma.
FAQs – Gas & Energy Directional Drilling in Oklahoma
Can you bore under roads and driveways without shutting them down?
Yes. HDD is ideal for crossings under roads, driveways, parking lots, and sidewalks. In many cases traffic stays open while we complete the bore and restoration.
Do you handle gas tie-ins, testing, and final commissioning?
We specialize in the drilling and pipe installation scope. Tie-ins, pressure testing, and final gas work are typically performed by your gas utility or mechanical/gas contractor. We coordinate closely so the hand-off is smooth.
What information do you need to quote a gas HDD project?
A plan set or sketch with pipe size, approximate length and depth, endpoints, site address, and any known utilities or obstacles. Photos are helpful, and we’re happy to walk through the scope on a quick call.
How far in advance should we schedule your crew?
The earlier the better, especially for work in busy streets or plant environments. Reach out during design or pre-con if possible so we can reserve time and help plan the most efficient bore path.
Ready to Schedule Gas & Energy Directional Drilling in Oklahoma?
Send us your plans or a simple sketch and we’ll put together a straightforward HDD price and plan for your gas scope.
Call or text: 405-409-7423
Email: darren@wordpress-1653543-6578033.cloudwaysapps.com
Electric & Fiber Optic Directional Boring in Oklahoma
Trinity Boring Solutions installs electric, fiber optic, and telecom conduit using horizontal directional drilling (HDD) across Oklahoma. From street lighting feeds to data and fiber backbones, we keep your infrastructure protected, on grade, and out of sight.
- HDD for power, fiber, telecom, and low-voltage conduit
- Street, parking lot, and intersection crossings without open trenching
- Contractor-friendly, fully licensed and insured in Oklahoma
Serving Oklahoma City, Tulsa, Norman, Edmond and statewide for power and fiber projects.
Why Use HDD for Electric & Fiber Optic Conduit in Oklahoma?
Power and communications can’t afford downtime. Our HDD crews help you build out street lighting, site power, fiber rings, and telecom feeds without tearing up finished pavement, landscaping, or busy drives.
Clean Crossings Under Roads & Drives
We bore under streets, entry drives, and parking lots so your conduit can be installed with minimal disruption and far less restoration than open trenching.
Conduit Layout That Matches Your Plans
Single or multiple conduits, sweeps, and vault locations are drilled to match your electrical or fiber design, helping your EC or ISP make fast, clean pulls.
Contractor-Friendly Scheduling
We coordinate with your project superintendent, electrical contractor, or IT / low-voltage team so our shots are completed on time and ready when you need them.
Electric & Fiber Directional Drilling Services
We support everything from small lighting feeds to full campus fiber backbones and utility corridor work.
Street & Site Lighting Conduit
HDD installation of power conduit for street lights, parking lots, residential additions, and commercial site lighting — without shutting down access.
Fiber Optic & Data Conduit
Directional boring for fiber optic rings, internet backhaul, campus data loops, and ISP builds needing tight depth control and smooth bends.
Security, Camera & Control Conduit
Underground paths for low-voltage lines serving security cameras, access controls, signage, and building automation systems.
Shared Utility & Duct Banks
Multi-conduit bores for combined power, fiber, and communications in campuses, industrial parks, substations, and utility corridors.
Our Electric & Fiber HDD Process
A simple process that keeps your team in sync and speeds up final pulls and terminations.
1. Plan Review & Layout
You send us conduit sizes, counts, endpoints, and elevations. We review your plans or sketch and confirm shot lengths, depths, and any structures we’ll cross.
2. Utility Locates & Clearances
We coordinate with OKIE 811 and your EC or utility rep to protect existing power, gas, water, and communications while planning clear separation distances.
3. Pilot Bore & Verification
Our crew drills the pilot bore along the planned path, checking depths and locations at key points so your conduit stays on grade and in spec.
4. Reaming & Conduit Pullback
We ream the bore to the proper size and pull your conduit or duct bank in place, keeping bends smooth so cable and wire pulls go quickly.
5. Pits, Backfill & Turnover
Entry and exit pits are backfilled and restored so your electrician, fiber installer, or ISP can handle terminations, splicing, and energizing.
Featured Electric & Fiber HDD Project – Campus Street Lighting
Power and low-voltage conduit installed under busy campus drives and parking lots.
- Scope: Multiple HDD shots for lighting and low-voltage conduit under roads and sidewalks.
- Challenges: Heavy daily traffic, tight work windows, existing utilities, and strict restoration requirements.
- Approach: Night and off-hours work, daylighting at key crossings, and staged conduit installations.
- Result: Fully lit campus streets and lots with minimal disruption to students, staff, and visitors.
Electric & Fiber HDD Capabilities
Electric & Fiber HDD Service Areas in Oklahoma
We mobilize for electric, fiber, and telecom bores across Oklahoma — from infill work to new builds.
Oklahoma City Metro
Oklahoma City, Edmond, Norman, Moore, Yukon, Mustang, Midwest City, Del City, and surrounding communities.
Tulsa & Eastern Oklahoma
Tulsa, Broken Arrow, Bixby, Jenks, Owasso, and nearby cities needing electric or fiber HDD support.
Statewide & Rural
Subdivisions, rural street lighting, plant projects, and long fiber runs across Oklahoma. Send your location and scope and we’ll confirm availability.
Looking for gas or water HDD as well? Visit our gas & energy directional drilling services .
FAQs – Electric & Fiber Optic Directional Boring in Oklahoma
Can you bore under active streets and drives without shutting them down?
In many cases, yes. We can often complete HDD shots under streets, entrances, and parking lots while keeping traffic open or on a short, controlled closure.
Do you furnish conduit, or should our electrician provide it?
We can either install owner-furnished conduit or provide schedule, HDPE, or fiber duct as part of our scope. We’ll clarify who is furnishing what during the quote.
What information do you need to quote an electric or fiber HDD run?
Conduit size and quantity, approximate length, depth, endpoints, site address, and any known conflicts or structures to cross. Plan sheets or a marked-up site plan are ideal.
How far in advance should we schedule your crew?
The earlier the better, especially for work in live sites, campuses, or urban streets. Reach out during design or early construction so we can lock in one or more HDD windows on your schedule.
Ready to Schedule Electric or Fiber HDD in Oklahoma?
Send us your plans or a simple sketch and we’ll put together a clear HDD price and plan for your electric or fiber scope.
Call or text: 405-409-7423
Email: darren@wordpress-1653543-6578033.cloudwaysapps.com